G-robot ›
Products › Communication ›
Matching Results: Communication
Infrared Remote Controller
The DIR5538 Infrared Remote Controller is general Infrared remote controller compatible with WiRobot MIR5538 Infrared Remote Controller Module respectively.
Infrared Remote Controller Module
The MIR5538 Infrared Remote Controller Module has on-board infrared detecting and emitting elements working in the same mode and at the same spectrum as that for TVs, VCRs, audio equipment, air conditioning and other home electronic appliance. The MIR5538’s IR detecting element can receive the control signal from a regular IR remote controller and the IR emitting element can send the control signal to appliances named above. The data signals are usually transmitted in modulated waves and there is a Band Pass Filter (BPF) in IR detector to recover them. The BPF center frequency of the MIR5538 is 38 KHz.
RS232 Cross-over Serial Cable(CCR2150)
1.5 M 9-wire standard RS232 DTE-to-DTE (cross connection) cable with female 9-pin DSUB connectors at both ends
RS232 Interface Module with Power Supply(MCR3210P)
The MCR3210P RS232 Interface Module is a hardware matching interface compatible with standard RS232 electrical specifications. Powered by single 3.3 V power supply, working as the bridge between the TTL logical-level signal and RS232 device, the MCR3210P is capable of transmitting and receiving up to 1 M bits/sec with RTS/CTS handshaking. it has a power supply input connector for using with wireless module at PC side.
RS232 Interface Module(MCR3210)
The MCR3210 RS232 Interface Module is a hardware matching interface compatible with standard RS232 electrical specifications. Powered by single 3.3 V power supply, working as the bridge between the TTL logical-level signal and RS232 device, the MCR3210 is capable of transmitting and receiving up to 1 M bits/sec with RTS/CTS handshaking.
WiFi 802.11g serial module with antenna
The WFS802g WiFi (802.11g) serial module is the most compact, integrated solution available to add 802.11g wireless networking to your robots with a serial interface.
